Welcome to Round Color Printing&Packing Limited
Email us now: quote@rcolorprinting.com for a quick quotation.

News

Contact Us

You are here:Home >> News >> Industry inform...

Industry information

Moisture-proof measures for printing warehouse

Time:2025-03-11 Views:0
1、Place neatly
In general, the paper and products should be placed neatly, and must be placed in the right position, with a large gap between the plates as far as possible to facilitate air circulation. It is not advisable to mess up or have no gaps between the boards, so that once the paper is damp, there is no room for recovery. When the weather is sunny and the outdoor air humidity is lower than the air humidity of the warehouse, it is necessary to open the window to speed up the indoor air circulation and discharge the moisture in the warehouse.

2、Check the card periodically
Some of the boards will be damaged during use, so that the paper will be in direct contact with the ground, so it will absorb the earth and cause the paper to be damp. The height of the board is also particular, the height must be more than ten centimeters, and the material of the board is also required, it is best to use the whole plate, which can reduce the contact between the paper and the moisture, so as to achieve the effect of moisture.

3、Enclose the membrane tightly
We know that some products have higher requirements, in order to protect it, it will be enclosed, which needs to be tightly enclosed, not only a thin layer, so that it can not protect against moisture, and the card should also be enclosed when the film is enclosed, only in this way can the maximum barrier water vapor and paper contact. Moreover, if the whole board paper is not used up after opening the package, it should be sealed with an enclosing film in time to reduce the contact time between the paper and the humid air.

4、Control the air humidity
We know that the warehouse is relatively closed, there are fewer Windows, so the warehouse needs to have ventilation equipment, such as exhaust fans, and of course, you can also use quick lime, moisture absorbent and other things that can dehumidification to prevent moist air from destroying the paper.

There are many ways to moisture-proof printing warehouse, the above is only a very common method, if you have any different or better opinions, welcome to leave a message to discuss.
  • Previous:Nothing
  • Next:Why does the ink color change? How to fix it?  2025/03/04
  • Copyright © 2018 Round Color Printing&Packing Limited All Rights Reserved  
    Web Design—Tiandixin