Do these four steps, the paper is not afraid of moisture in the rainy season
Time:2023-08-09
Views:1979
1. Keep the storage warehouse dry and control the humidity
If conditions permit, add a dehumidifier or start a small fan to increase convection. When necessary, we can put some desiccant and the like, so that the damage caused by the humid air to the kraft paper can be well prevented.
2. Regularly check whether the bottom card is damaged and prevent direct contact between the paper and the ground
The height of the card should be more than 10 cm. The board uses a whole plate instead of a strip. This can greatly reduce the direct contact surface between kraft paper and humid air, so as to achieve the effect of moisture resistance.
3. The enclosing film should be full, rather than only one layer to do formal work
The surrounding film is also carried out simultaneously with the card, and whether the surrounding film is standardized and strict, and whether the contact between water vapor and kraft paper can be blocked to the maximum extent plays a crucial role. If it is not used up after opening the package, it should be sealed with an enclosing film in time to reduce the contact time between the paper and the humid air.
4. The paper is placed, and there should be a large gap between the cards to facilitate air circulation
After the day clears up, you can open the window to speed up the indoor air circulation and discharge the moisture in the warehouse.
The most important thing is to prepare for a rainy day. As long as we finish the preventive measures, strictly according to the process of operation, it is completely able to avoid the occurrence of such incidents as kraft paper moisture.